Setting Up Serviceability Agents For Alarms On System Manager - Avaya Aura Deployment Manual

3. On the SIP Entity Details page, configure the following required field settings:
• Name: Type a name for the SIP entity.
• FQDN or IP Address: Type the FQDN or IP address of the Avaya Aura
• Type: Select SIP Trunk.
• SIP Timer B/F (in seconds): Retain the default value of 4.
• SIP Link Monitoring: Select Link Monitoring Disabled.
For information about other fields, see the SIP entity field descriptions in Administering
Avaya Aura
4. In the Entity Links area, click Add to add entity links between the newly created SIP entity
and the entities representing Session Manager.
While mapping the newly created SIP entity with the Session Manager entities,
ensure that the following is set:
• Protocol: TLS.
• Port: 5061.
• Connection Policy: trusted.
5. Click Commit to save the changes.

Setting up Serviceability Agents for alarms on System Manager

Before you begin
On System Manager, set up an SNMPv3 user profile from Services > Inventory > Manage
Serviceability Agents > SNMPv3 User Profiles.
Set up an SNMP target profile from Services > Inventory > Manage Serviceability Agents >
SNMP Target Profiles.
About this task
To receive Avaya Aura
Agents.
Procedure
1. Log on to System Manager.
2. Click Services > Inventory > Manage Serviceability Agents > Serviceability Agents.
3. Select the Avaya Aura
4. Click the SNMP Target Profiles tab.
5. In the Assignable Profiles section, click the SNMP profile you created, and click Assign.
6. Click the SNMPv3 User Profiles tab.
7. In the Assignable Profiles section, select the SNMPv3 profile created, and click Assign.
October 2018
®
Session Manager.
®
Web Gateway alarms in System Manager, you must set up Serviceability
®
Web Gateway host name, and click Manage Profiles.
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
®
Adding the Avaya Aura
®
Web Gateway
Web Gateway to System Manager
®
Web Gateway.
101