Administer No-License/Emergency Numbers [From G3V4]; Verify The Upgrade [From G3V4] - Avaya MCC1 Installation And Upgrades

Administer No-License/Emergency Numbers
[from G3V4]
Return to Task List
If the system enters a No-License mode, the switch only processes emergency calls. Use this procedure to
adminster the emergency numbers for No-License mode situations.
1
At the SAT, type
The Feature-Related System Parameters screen displays.
2
In the Emergency Numbers - Internal field (optional) type a valid extension.
NOTE:
This field is intended for campus environments where there is an internal emergency
number that people are directed to use instead of 911. Calls to other extensions will not go
through. This number cannot be a hunt group or ACD number.
3
In the Emergency Number - External field (required) type a 21-digit, dialpad-valid
character string that can include trunk access codes. The default for this field is 911.
4
In the No-License Incoming Call Number field (optional) type a valid extension.
NOTE:
All calls are not rerouted to this number; only calls to this number get through. This
number cannot be a hunt group or ACD number.
5
Press Enter to save the changes.

Verify the upgrade [from G3V4]

Return to Task List
1
Execute
2
Type
display alarms
If the system is not alarm-free, take the needed corrective actions.
3
Type
list configuration software-version
(duplex) and press Enter. Check the Memory Resident field to verify that it shows the correct
software load.
4
Type display communication-interface links
Status each of the links.
NOTE:
ISDN-PRI D-channel links no longer appear on this screen. (For release 7 and later,
ISDN-PRI resides on the network packet circuit pack.) For release 7 and later, the only
way to determine if an ISDN-PRI D-Channel is up is to use the status signaling group
command.
SI Installation and Upgrades
June 2004
change system-parameters features
and verify that the system is in a normal state.
status system 1
and press Enter.
G3iV4 to Avaya Communication Manager
Task List: G3iV4 to Avaya Communication Manager
and press Enter.
(simplex) or
list configuration software-version long
and press Enter.
85