Administering Fiber Optic Cables; Fiber Link Administration Form; Administration Commands - Avaya MCC1 Installation And Upgrades

Media gateways installation and avaya definity server si upgrades made easy

Hide thumbs Also See for MCC1:

Table of Contents

Install Fiber Optic Cable Pass-Thru Kit for SCC1 (Single-Carrier) Cabinets

Administering Fiber Optic Cables

You administer Fiber Optic Cables only on an Avaya Media Gateway or in a Multicarrier

Cabinet (MCC1).

When a fiber optic cable is properly labeled, it is easy to trace the desired circuit by looking at the labels

on the cross-connect, the cable itself, and the individual fibers in the cable.

PN reliability configurations

Task List: Administration Details

Fiber Link Administration Form

This form administers fiber links, each of which is identified by a fiber number.

Port networks (PNs) are connected via direct fiber link connections or through a center stage switch

(CSS) to provide the interconnection of port networks required for voice/data information transfer. The

CSS is composed of "switch nodes" that can be interconnected in one or two levels to provide Port

Network Connectivity (PNC). The CSS provides circuit-switched connectivity for voice and data

communications as well as packet-switched connectivity. Fiber link administration permits an

administration of translation data associated with a switch connection (such as optical fiber, metallic

cable, or DS1CONV circuit packs and DS1 facility links between two endpoints). The two fiber

endpoints can be:

An expansion interface (EI) circuit pack

A switch node interface (SNI) circuit pack

Only one administrative terminal can administer fiber links at a time; others can display

fiber link information.

Administration commands

Use the following commands to administer the Fiber Link Administration form.

link number or ['next']

SI Installation and Upgrades

Table of Contents