Disassemble The G3V4Vs System [From G3V4Vs/R5Vs/R6Vs] - Avaya MCC1 Installation And Upgrades

Disassemble the G3V4vs System [from
G3V4vs/R5vs/R6vs]
Return to Task List
1
Remove any unused 25-pair cables from the rear of the system.
2
Loosen the 4 shoulder screws that hold the cabinet to the mounting plate (see
view of DEFINITY vs cabinet,
3
Remove the locking screw that holds the cabinet to the center of the mounting plate.
4
Return the system cabinet to its locked operating position.
5
Align the 4 shoulder screws with the keyhole slots and remove the cabinet from the mounting
plate.
6
Remove the 5 lower wood screws from the wall plate and loosen the top 2 wood screws.
7
Remove the mounting assembly.
8
Remove the top 2 wood screws.
Figure 8: Exploded view of DEFINITY vs cabinet
Figure notes
1 Shoulder screws
2 Compact single-carrier cabinet
3 Plywood sheet
Return to Task List
SI Installation and Upgrades
June 2004
G3V4vs/R5vs/R6vs to Avaya Communication Manager
Task List: DEFINITY vs to Avaya Communication Manager
on page 171).
1
3
4
6
4 Wall-mounting plate with keyhole slots
5 Cabinet support bracket
6 Locking screws on spring-loaded housing
2
5
Figure 8, Exploded
g3vs-2 LJK 030996
171