Restore Announcements (Tn750 Or Tn750B Only) [From G3V4] - Avaya MCC1 Installation And Upgrades

15
In the Alarm Origination field choose:
— DON'T CHANGE to leave the product's current alarm origination status unchanged (the
common choice for upgrades).
— YES to enable alarm origination.
— NO for no alarm origination.
16
In the Alarm Destination field, choose
— DON'T CHANGE to leave the product's currently-administered alarm origination number
unchanged (the common choice for upgrades).
— SET NUMBER TO and type the complete alarm destination telephone number, including
any dialing prefix (for example, "9" or "*9"). The default value in this field is the TSO-
Denver number (18005353573).
17
Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress messages to indicate the
current status.
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or Home buttons while
ART displays these progress messages.
If you have to abort your registration, click on the Abort Session button that appears with
one of the progress messages.
If the preceding steps have been completed successfully, ART displays the DEFINITY Upgrade
Registration Report.
18
Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.
19
Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.
Return to Task List
Restore announcements (TN750 or TN750B
only) [from G3V4]
Return to Task List
1
Insert the white flash card with the saved announcements.
2
Type restore announcements
This command takes about 45 minutes to execute.
Return to Task List
SI Installation and Upgrades
June 2004
G3iV4 to Avaya Communication Manager
Task List: G3iV4 to Avaya Communication Manager
and press Enter.
91