Verify System Status [From R5/R6/R7/R8Si]; Modify External Alarm Connections [From R5/R6/R7/R8Si] - Avaya MCC1 Installation And Upgrades

R5/R6/R7/R8si to Avaya Communication Manager
Task List: R5/R6/R7/R8si to Avaya Communication Manager

Verify system status [from R5/R6/R7/R8si]

Return to Task List
1
Verify that system status is normal.
Execute
2
Verify that the system is alarm-free.
Execute
3
Identify and record customer-placed busy-outs.
Execute
placed by the customer.)
NOTE:
You will restore the customer-placed busy-outs after you have upgraded the system.
4
For a system that has existing BX.25 links that are being retained after the upgrade: identify and
record them.
Execute
5
Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
For upgrades from systems later than G1,
For a system with Expert Agent later than G3V3,
If any command does not complete successfully, escalate the problem immediately.
Return to Task List
Modify external alarm connections [from
R5/R6/R7/R8si]
Return to Task List
You modify the external alarm connections if necessary (that is, if they changed with this upgrade).
See the Auxiliary lead appearances at AUX connector
and the Auxiliary lead appearances for System 75, G1, and G3
The control carrier AUX connector outputs include:
•
Alarm monitoring for the auxiliary cabinet.
•
Seven -48 VDC power sources for emergency transfer units.
•
Three -48 VDC power sources for remotely powering 3 attendant consoles or telephone adjuncts.
108
(If status is not normal, take the needed corrective actions.)
status system 1
(If the system is not alarm-free, take the needed corrective actions.)
display alarms
display errors (Examine the error log and record the error 18s that identify the busy-outs
display communication-interface links
list ars analysis
list agent
table for the current pinouts for an external alarm,
table for the prior pinouts.
SI Installation and Upgrades
June 2004