About Accessing The System; Administration Screens And Commands - Avaya MCC1 Installation And Upgrades

Bring the System Online

About Accessing the System

About Accessing the System
To administer the Avaya Media Gateway, you must be able to access the system. The Avaya Media
Gateway no longer requires a dedicated management terminal, known as a system administration
terminal, or SAT. Personal computers and technician laptops equipped with Avaya Site Administration
software are the primary support access for system initialization, aftermarket additions, and ongoing
maintenance. SAT is now an option.

Administration Screens and Commands

The system is administered using screens displayed on the PC. The screens are used to add, change,
display, list data, and to remove system and telephone features. To access a screen, enter a valid system
command in response to the
System commands are standard words and phrases instructing the system to perform a specific function.
The commands are arranged in a hierarchy of keywords; that is, enter one command to go to a different
level. The commands contain three parts: ACTION, OBJECT, and QUALIFIER.
•
ACTION is the first part of the command. When
specifies the operation desired. Examples include add,
and
save
•
OBJECT is the second part of the command and specifies the particular object to be administered.
Typical entries are
•
QUALIFIER is the last part of the command. It is one or more words or digits used to further
identify or complete the OBJECT. For example,
are qualifiers.
3600
An example of the command line required to add a station with extension number 1234 is
1234 . In this example,
command line, spaces are required between the ACTION, OBJECT, and QUALIFIER.
To save time, enter enough letters for each part of the command to make it unique. For example, if you
want to enter the command
sufficient.
NOTE:
The craft or dadmin logins may not be allowed to perform some of the steps needed to
initialize the system. If access is denied to some of these procedures, contact Avaya for
assistance.
Use the Help key for a list of options and the Cancel key to back out of any command. Refer to the
Administrator's Guide for Avaya Communication Manager (555-233-506) for detailed procedures.
448
command: prompt.
.
hunt-group , coverage path
add is the ACTION,
change system-parameters country-options
appears on the screen. The ACTION
command:
duplicate
, and station .
hunt group 15
station is the OBJECT, and
, , ,
change remove display
or station 3600 , where 15 and
add station
1234 is the QUALIFIER. In the
, typing is
cha sys coun
SI Installation and Upgrades
June 2004
, ,
list