Connecting Critical Reliability Remote Cabinets - Avaya MCC1 Installation And Upgrades

Media gateways installation and avaya definity server si upgrades made easy

Hide thumbs Also See for MCC1:

Table of Contents

Figure 63: Critical Reliability fiber optic connections (adjacent cabinets)

TRANSCEIVERS

Return to Task List

Connecting critical reliability remote cabinets

When a critical-reliability PPN and EPN are remotely separated with fiber, four fiber-optic cables (FL2P-

P-XX), four lightwave transceivers (9823-type), and four lightwave-interface units (provided by the

PSC) are required.

Behind control cabinet A of the single-carrier PPN (see

with Two Port Networks,

— Install a 9823-type lightwave transceiver on the connector at slot 1A01.

— Connect one end of a fiber-optic cable to the 9823-type lightwave transceiver at slot 1A01.

— Route the fiber-optic cable from the 9823-type lightwave transceiver to the cabinet cable

tray and out of the cabinet through the cable manager to the PDS cross-connect facility.

— At the PDS cross-connect facility, connect the fiber-optic cable to the lightwave-interface

unit provided.

— Delicately attach the fiber-optic cable (with cable ties) to the wall of the cable tray at the

built-in cable-tie positions.

SI Installation and Upgrades

FIBER-OPTIC CABLES

on page 267 and

on page 268):

System 75 XE to R8si (Blowback)

Task List: System 75 XE to R8si

Figure 64, Critical-Reliability Release 8si

Figure 65, Critical Reliability fiber-optic connections

TRANSCEIVERS

Table of Contents