(Single Carrier Cabinets) Made Easy - Avaya MCC1 Installation And Upgrades

(Single Carrier Cabinets) Made Easy

Perform these tasks to install single-carrier cabinets:
1
Install and Connect SCC1 (Single-Carrier Cabinets)
2
Install Telecommunications Cabling
3
Bring the System Online
4
Test the System
5
Install and Wire Telephones
6
Install and Administer Trunks
7
Install and Wire Telephone Power Supply
8
Install Additional Hardware
9
Add IP Solutions
10
Install and Connect Modems
11
Administer the features, telephones, and other equipment according to customer data found on the
provisioning plan. Use the procedures in the Administrator's Guide for Avaya Communication
Manager (555-233-506).
12
Test Telephones and Other Equipment
Select the activity you are currently performing to see information, task lists, and procedures for that
activity.
NOTE:
It may be more efficient to install each hardware component, administer it, and test it
before going on to install another component. As an example, install the attendant console
using the procedures in
the Administrator's Guide for Avaya Communication Manager (555-233-506), and test it
using the procedures in
You can also find information on these topics here:
•
Option Switch Settings
•
Approved Grounds
•
Administering Fiber Optic Cables
•
Install Fiber Optic Cable Pass-Thru Kit for SCC1 (Single-Carrier) Cabinets
For duplicated systems only:
Cabinets
circuit packs installed in cabinets A and B.
•
Connector and Cable Diagrams (Pinout Charts)
•
UPS Installation for SCC1 EPN A-Carrier Cabinet
SI Installation and Upgrades
June 2004
Install and Wire
Test Telephones and Other
Install Fiber Optic Cable Pass-Thru Kit for SCC1 (Single-Carrier)
includes instructions for installing the fiber optic cable between the duplication interface
(Single Carrier Cabinets) Made Easy
Telephones, administer it using the procedures in
Equipment.
361