Oce Repro Desk User Manual page 99

Check the CalComp drawing properties
Click once on the unprocessed drawing file.
1
Click once on the Properties button.
2
The Drawing File Information dialogue box opens.
To change Sync byte, choose Single or Double sync and choose a value from
3
the list box.
To change Step size, click on the radio button to choose a preset value or enter
4
a value in the Other files.
Set the Use Checksum option to On or Off.
5
To change the End of Message, use the arrows to enter a new value in the End
6
of Message field.
Only change a CalComp setting if you really are sure that the ones
Note:
checked and suggested by Océ Repro Desk are incorrect.
Check and process drawings 99