Oce Repro Desk User Manual page 444

There are exceptions to this general structure, though. If an RCF file is added
to a job and the file is processed to a VIC, the RCF information will populate
the job settings and finishing properties (such as the folding settings) for that
file. If those settings are edited after the RCF file has been converted to a VIC,
the new settings will take precedence over the RCF settings.
If an RCF file is sent to a queue or a polling queue, the RCF information will
take precedence over the queue or polling queue information.
For example, when an RCF file that contains folding instructions is sent to a
queue (or placed in a polling queue) that is set to 'Don't Fold', the file will still
be folded according to the RCF instructions.
Now, when a file with RCF folding on is printed directly and the 'folding tab'
is activated in the finishing properties, then the settings in the finishing
properties will take precedence (either to fold or not fold).
444 Océ Repro Desk Server User Manual