Banner - Oce Repro Desk User Manual

Enter a number in the field to specify how much white space.
The strip is added to the cut length, so the resulting media size is not
Note:
standard.
Banner page
You can specify to print a banner page for the current job, or for each set in the
current job. You can use any ASCII file (*.ASC) or stamp (*.LBL) as banner
page. If you use a stamp file, you can include variables like 'job name' or 'date
& time' (see 'Electronic stamps' on page 150).
Specifying banner page
Select 'Print Océ TDS600' in the 'Print' quick menu.
1
Click the 'Banner Page' tab at the top of the window.
2
The following window will appear:
3
[134] Finishing Properties window: Banner Page
Select when you want to print a banner page: at the start/end of the job or at
4
the start/end of a set.
Select the paper size for the banner page.
5
You can select one of the available standard sizes, or 'Same as first drawing'
(the same size as the first drawing of the job or set).
If required, you can specify a trailing edge for the banner page.
6
244 Océ Repro Desk Server User Manual