Pen Width - Oce Repro Desk User Manual

Selecting the pattern
Open the desired property according to the procedure described in 'Set up a
1
pen set' on page 137.
Click the Patterns tab
2
Select the pattern by clicking the desired pattern with the left mouse button.
3
Click Apply
4
To view all patterns, use the scroll bar, which is to the right of the select
Note:
pattern option.

Pen width

You can set pen widths from 0 to 40 pixels. Océ Repro Desk uses pixels,
millimeters, mils (1/1000 inch), and centimeters for pen weights. Because pens
are measured by pixels (dots), measurement is limited. If it is necessary to
round pen thicknesses, Océ recommends that you do so in consultation with
the author of a drawing.
[56] Pen width
Set pen parameters
1123
139