Océ 9600 Printer; Start Up The Océ 9600 Print Manager - Oce Repro Desk User Manual

Océ 9600 printer
The Océ 9600 printer is connected to a Server PC, using Repro Desk as a
controller.
To establish communications with the Océ 9600 printer, you must start
Note:
up the Océ Print Manager on the Server PC first.
Start up the Océ 9600 print manager
Print manager must be started up before you can print on the Océ 9600 printer.
During printing Print manager displays a list of the drawings in the print job.
It displays the document name, the current status, and whether the drawing is
being sent, is being rasterized, or has been printed.
It shows which roll the drawing has been printed on, the width and length of
the drawing, the number of copies that have been printed and the time at which
a drawing was printed.
After printing it displays how many sheets have been printed of each of the
loaded rolls and the length in feet that has been used on the roll. This enables
you to monitor the roll status directly from the application.
Start up the Océ 9600 Print Manager
Start the Print Manager in the Program folder you specified during installation.
1
270 Océ Repro Desk User Manual
RDS7000.TIF