Stacker (Océ 9700/9800) - Oce Repro Desk User Manual

Stacker (Océ 9700/9800)
If the Océ 9700/9800 is equipped with a high capacity stacker, you can specify
stacker settings.
Specifying Stacker Settings
Click the 'Stacker' tab at the top of the window.
1
The following window will appear:
2
3717-144
[148] Finishing Properties window: Stacker
Select the bin selection method you want to use:
3
New bin when bin full
All copies are delivered onto the same bin. If this bin is full, the next bin will
be used (bin 6 will be followed by bin 1).
new bin per set
Each set will be delivered on a new bin (bin 6 will be followed by bin 1).
Note:
automatically to finish the set.
New bin per job
Each job will be delivered on a new bin (bin 6 will be followed by bin 1).
Note:
automatically to finish the job.
Print on Océ 9700 or Océ 9800
If a set does not fit onto one bin, the next bin will be selected
If a job does not fit onto one bin, the next bin will be selected
263