The scan job is saved. The 'Scan' button in the toolbar changes to a 'Stop Scan'
button.
Scan the original on the Océ 9600 scanner.
4
The scanned original appears as a file in the job window.
Scan into an existing, not saved job
Make sure the existing, not saved job is active.
1
Click the 'Scan' button in the toolbar.
2
The following dialog box appears.
[283] Scan into a not saved job dialog box
Click 'Yes'.
3
The active job is renamed.
The renamed job window contains the files of the existing, not saved job (if
any).
In front of the renamed job window, the following dialog box appears.
[284] Scan into job dialog box
If required, define the job name, destination and file template.
4
Click 'OK'.
5
The scan job is saved. The 'Scan' button in the toolbar changes to a 'Stop Scan'
button.
Scan the original on the Océ 9600 scanner.
6
The scanned original appears as a file in the job window.
Scan into a saved job
When you open a saved job, that job can contain the following.
Scan 9800/9600
403
Need help?
Do you have a question about the Repro Desk and is the answer not in the manual?