Supported Vector Formats; Supported Raster Formats - Oce Repro Desk User Manual

Supported vector formats

Océ Repro Desk 1.1 supports the following vector formats:
AutoCAD DWG and DXF.
The internal interpreter supports AutoCAD R2.5 to AutoCAD R2002 files.
Data Exchange Format (DXF)
HP-GL, HP-GL/2, HP-RTL
CalComp 906/907 PCI
PostScript Level 3 using the optional PostScript converter
Océ Repro Desk does not differentiate between HP-GL or HP-GL/2.
Note:

Supported raster formats

Océ Repro Desk 1.1 supports the following raster formats:
CALS (Group IV, type 1)
NIFF (Group IV)
TIFF single page monochrome
TIFF implementations include the following types:
Group IV (6.0, tiled, striped, reverse bit order)
Group III
Packed bits
Uncompressed
Additionally, Océ Repro Desk permits a simple ASCII file to be used as a
banner page, as well as the native label format for banner pages (*.lbl).
The author of a drawing is ideally the person who should process it. This is
because often there are questions concerning scale, pen widths, or pen patterns,
which only the author can answer.
Check and process drawings 85