Rolls And Sets Tab - Oce Repro Desk User Manual

Rolls and Sets tab

The Rolls and Sets tab contains settings for media type and fit, set count and
collation.
Rolls and Sets options
Select 'Print Océ TDS400' in the 'Print' quick menu.
1
Click the Rolls and sets' tab at the top of the window.
2
The following window will appear:
3
[137] Finishing Properties Window: Rolls and sets tab
Roll Selection
that ensures a best fit for the printed drawing. Otherwise, choose a specific roll
or choose 'Manual' Feed if you wish to insert the media manually.
Media Feed
want Repro Desk to seek only an exact fit, or whether smaller, larger or any
size is acceptable.
Number of Sets
Collation Options
of the set printed last, so that it will be on top after printing.
Print on Océ TDS400
If you select 'Auto Roll', the Océ TDS400 will select the roll
Available only if you choose 'Auto Roll'. Choose whether you
Enter the number of job sets to print.
Select the 'Reverse Collation' check box to have the first file
249