Océ 9700/9800 Printer; Starting Up The Océ 9700/9800 Print Manager - Oce Repro Desk User Manual

Océ 9700/9800 printer
The Océ 9700/9800 printer is connected to the server using the Direct Raster
Interface (DRI). To establish communications with the Océ 9700/9800 printer,
you must start up the Print Manager first.
Starting up the Océ 9700/9800 print manager
Print manager must be started up before you can print on the Océ 9700/9800
printer. During printing it displays a list of the drawings in the print job. It
displays the name, the current status, whether the drawing is being sent, is
being rasterized, or has been printed.
It shows which roll the drawing has been printed on, the width and length of
the drawing, the number of copies that have been printed and the time at which
a drawing was printed.
After printing it displays how many sheets have been printed of each of the
loaded rolls and the length that has been used on the roll. This enables you to
monitor the roll status directly from the Océ Repro Desk application.
254 Océ Repro Desk User Manual