Introduction - Oce Repro Desk User Manual

Introduction

Print jobs are usually received in a queue. Before you can print such a job, you
have to open the queue, and then open a job window.
Then you can choose to print in one of the following ways:
Print on the Océ TDS800 printer (see page 234)
Print on the Océ TDS400 printer (see page 248)
Print on the Océ TDS600 printer (see page 240)
Print on the Océ 3165 PostScript printer (see page 298)
Print on a Windows printer (see page 212)
Write a CALS/TIFF file (see page 219)
Print on a HP-GL/2 or HP-RTL printer(see page 223)
Océ Repro Desk also offers special ways of printing, described in other
chapters:
Multiple Machine Support
Océ 9400, HP-GL/2/HP-RTL or PostScript printers (Océ 3165), attached to the
same Repro Desk Server.
You can install more than one Océ TDS800, each printer attached to its own
Océ Repro Desk Server 1.x.
You can also install more than one Océ 9600, Océ 9700 or Océ 9800, each
printer attached to its own Repro Desk 9x00 Server.
You can use one Océ Repro Desk Server or Océ Repro Desk Client to receive
jobs and print on all printers (see 'Multiple machine support' on page 343).
Direct printing
that is connected to Repro Desk Server, without user intervention at the server
side. (Not applicable to Océ 9400). The users of Repro Desk Remote Client
can define all print settings for each job.
Automatic printing
printer that is connected to Repro Desk Server, without user intervention at the
server side. The default printer dependent settings of the selected print queue
will be used for all print jobs.
202 Océ Repro Desk Server User Manual
Océ Repro Desk supports the installation of multiple
The users of Repro Desk Remote Client can print on a printer
The users of Repro Desk Remote Client can print on a