Auto: Normally the upper output is used. Only if the copy is too long to be
collected on the copy delivery tray or high capacity stacker (longer than 1230
mm or 48.5"), the lower output is used.
Click Apply.
5
Banner page (Océ 9700/9800)
You can specify to print a banner page for the current job, or for each set in the
current job. You can use any ASCII file or stamp (*.LBL) as banner page. If
you use a stamp file, you can include variables like 'job name' or 'date & time'
(see 'Electronic stamps' on page 150).
Specifying banner page
Click the 'Banner Page' tab at the top of the 'Configure Queue' window.
1
The following window will appear:
2
3812-144
[151] Finishing Properties window: Banner Page
Select when you want to print a banner page: at the start/end of the job or at the
3
start/end of a set.
Select the paper size for the banner page.
4
266
Océ Repro Desk User Manual
Need help?
Do you have a question about the Repro Desk and is the answer not in the manual?