Finishing Tab - Oce Repro Desk User Manual

Finishing tab

The finishing tab contains settings for delivery, folding, orientation cut method
and add a leading edge.
Set the Finishing options
Select 'Print Océ TDS400' in the 'Print' quick menu.
1
Click the 'Finishing' tab at the top of the window.
2
The following window will appear:
3
[138] Finishing Properties window: Finishing tab
Use job settings
Delivery device
Printer default: Use the delivery device as configured on the Power Logic
Controller.
Fold options
required in the Delivery device section.)
Custom fold
the sizes.
Create Binding Edge
of the folded package. Specify the size of the binding strip.
Image orientation
package based on image length and roll width.
250 Océ Repro Desk Server User Manual
Use the folder settings as defined in the actual job.
From the list, choose where the output will be delivered.
Choose 'Punch', 'Reinforce' or 'First fold only'. (A belt or bin is
Enter the width and length for the fold, or use the arrows to select
Select the check box to add a binding strip to one margin
If you select 'Auto', the machine determines a good fold