Finishing tab
The finishing tab contains settings for delivery, folding, orientation cut method
and add a leading edge.
Set the Finishing options
Select 'Print Océ TDS800' in the 'Print' quick menu.
1
Click the 'Finishing' tab at the top of the window.
2
The following window will appear:
3
RDS8041
[128] Finishing Properties Window: Finishing tab
Use job settings
Delivery device
Printer default: Use the delivery device as configured on the Power Logic
Controller.
If the Océ TDS800 is equipped with a folder, you can select one of the
following options for the folded output:
Stacker: The folded output will be delivered in the standard delivery tray of
the folder.
Belt 1 or Belt 2: If installed, you can select one of the delivery belts to collect
the folded output.
Belt Auto: If two belts are installed, you can select this option in order to use
both belts. If one belt is full, the folder will switch automatically to the other
belt.
Select a pre-saved folder configuration
settings, select one of the available configuration files. If required, change one
236
Océ Repro Desk Server User Manual
Use the folder settings as defined in the actual job.
From the list, choose where the output will be delivered.
If you want to use previously-saved folder
Need help?
Do you have a question about the Repro Desk and is the answer not in the manual?