Folder (Océ 9600) - Oce Repro Desk User Manual

Reverse Collation: If you select this option, the first file of the job will be
printed last. As result, the first file of the job will be on top after printing.
The drawings in the window will show the PRINT order of the
Note:
drawings, depending on options that are selected. The result after printing
will show a reversed order.
Click Apply.
3
Folder (Océ 9600)
If the Océ 9600 is equipped with a folder, you can specify Folder settings. You
can save the folder settings in a Configuration file, and recall them whenever
needed.
It is possible to specify the folding options in advance, when creating the job.
When creating the job, you can see in the Viewer which part of the drawing
will be on top after folding.
Folder options
options. Depending on the configuration of the folder you are using, you can
specify the following options:
Don't Fold: Output will not be folded.
Fold: Output will be folded without any options.
Fold & Punch: Output will be folded and punched (if puncher is installed).
Fold & Reinforce: Output will be folded, and a reinforcement strip will be
added (if reinforcement unit is installed).
First Fold Exit: Output will only be folded in one direction (first fold), and
then delivered in the first fold delivery tray.
To use punching or reinforcement, you must select (one of) the belts for
Note:
output delivery in the delivery settings (see page 284).
Method
Ericsson or AFNOR.
Orientation
portrait orientation. If you select 'Automatic', the machine determines the
length of the drawing to obtain a good fold package, depending on the roll
width.
Folding size
282 Océ Repro Desk User Manual
The folder of the Océ 9600 can be equipped with a number of
You can specify one of the following folding methods: Standard,
If you select 'Portrait' as orientation, the drawing should be in
You can specify the folding width and folding height yourself.