Options (Océ 3165) - Oce Repro Desk User Manual

Options (Océ 3165)
You can specify the following Océ 3165 options:
Image output options
Send only monochrome raster
The PostScript file will contain raster data without colors.
If this option is not selected, the contents of the PostScript file depends on
the contents of the source file: vector data will remain vector data, and raster
data will remain raster data.
This option can be selected in combination with other options (see below).
The following options only work when the source file contains vector data:
Draw all lines 1 pixel thick
This option only works when the source file contains vector data.
Draw all lines in monochrome (no color)
Draw all lines solid (no raster patterns)
Margin
"Use Metric Units," millimeters.
Staple
will be stapled. If you have specified to use the Copies field, the whole job will
be stapled once.
Print on both sides (Duplex printing)
print on both sides of the paper. You can choose between:
Long side: the output will be printed in such a way, you can bind the long
edge and open it as a book.
Short Side: the output will be printed in such a way, you can bind the short
edge and open it as a calendar.
Paper source
Automatic
Tray1: Paper size configurable per job
Tray2: Paper size fixed: configured once during installing
Tray3: Paper size fixed: configured once during installing
Tray4: Paper size fixed: A4 (large tray)
If you select Automatic, the Océ 3165 will select the paper size that ensures a
best fit for the printed drawing.
304 Océ Repro Desk Server User Manual
You can specify the following image output options:
You can specify the margin width in either inches or, if you enable
If you have specified the number of sets in the 'Output' menu, each set
You can select one of the following options:
If you select this option, the Océ 3165 will