Oce Repro Desk User Manual page 301

Use Copies Field Instead: The number of copies as defined for each drawing
in the Copies column of the job window will be used.
Click Apply.
5
Specifying output settings to save the file on disk
If not already selected, click the 'Output' tab at the top of the 'PostScript Out'
1
window (see figure 173 on page 300).
Select 'Directory' and specify the appropriate directory (you can use the
2
Browse button at the right side).
If you want to save the *.Job file in the specified directory as well, select the
3
option 'Write (*Job) File in Directory'.
Make sure the option 'Directory is a Queue' is not selected.
4
Click Apply.
5
Specifying Output settings to send the file to a queue
If not already selected, click the 'Output' tab at the top of the 'PostScript Out'
1
window (see figure 173 on page 300).
Select 'Directory' and specify the appropriate queue by (you can use the
2
Browse button at the right side to select the *.Q file in the Queue folder).
Make sure the option 'Write (*Job) File in Directory' is not selected.
3
Select the option 'Directory is a Queue'.
4
Click Apply.
5
Print on Océ 3165 301