Print On The Océ Tds800 Printer - Oce Repro Desk User Manual

Print on the Océ TDS800 printer
When you are ready to print, you can adjust many printer settings through the
finishing properties dialog.
To use the Océ TDS800, you must start the Océ TDS800, its connected
controller, the Print Manager and Repro Desk.
Print on the Océ TDS800 printer
Start 'Print Manager' in the 'Program' folder you specified during installation.
1
RDS8068
[125] Print Manager Window
Start Repro Desk.
2
Open a job window, containing the job you want to print.
3
[126] Job Window
If required, you can change the file settings in the Job window (see chapter 9,
4
'Imaging properties' on page 123).
Go to the 'Print' Quick menu.
5
Select 'Print Océ TDS800'.
6
The Finishing Properties dialog box appears.
Specify the required print settings (see following sections for details).
7
Click 'Apply'.
8
234 Océ Repro Desk Server User Manual