Hpgl Pass-Through - Oce Repro Desk User Manual

HPGL pass-through

The HPGL pass-through function offers a way to handle color output. The
performance is similar to the HPGLOut performance. You can use HPGL
pass-through when the Océ Repro Desk color interpretation does not give you
the required output on inkjet printers.
Océ Repro Desk skips the processing of HPGL or HPGL-2 files that are
printed through HPGLOut when the following settings apply.
The HPGL pass-through setting is checked
The 'Color' column in the 'Job' view is set to 'Yes'.
The original file is sent to the printer. The printer does the color matching and
file interpretation. Therefore, the correct output completely depends on the
following.
The printer driver that you use
The settings that you define in the printer driver.
When you print a job with the HPGL pass-through function enabled, the
Note:
job is registered in the accounting log files.
The following versions of Océ Repro Desk support HPGL pass-through.
Océ Repro Desk Server 1.0.5 and higher
Océ Repro Desk Client 4.30.5 and higher.
Enable HPGL pass-through
Open the 'Configure' menu.
1
Select 'Advanced'.
2
Navigate in the settings tree to the following location:
3
'File Processing\HPGL\Bypass Color Processing'.
By default, the setting is <No>.
Check the box next to 'Bypass Color Processing' .
4
By default, the box is unchecked. The setting changes to <Yes>.
If you change the 'Bypass Color Processing' flag while a job is open, you
Note:
must close and then reopen the job. Then the setting applies to the job.
Keep the following in mind in relation to a pass-through image:
You can only change the settings for 'Copies' and 'Color'.
You can not add overlays to the image.
230 Océ Repro Desk Server User Manual