Oce Repro Desk User Manual page 291

Specifying Output settings to save the file on disk
If not already selected, click the 'Output' tab at the top of the Océ 9400 print
1
window (Group 4 Out).
Select 'Directory' and specify the appropriate directory (you can use the
2
Browse button at the right side).
If you want to save the *.Job file in the specified directory as well, select the
3
option 'Write (*Job) File in Directory'.
Make sure the option 'Directory is a Queue' is not selected.
4
Click Apply.
5
Specifying Output settings to send the file to a queue
If not already selected, click the 'Output' tab at the top of the Océ 9400 print
1
window (Group 4 Out).
Select 'Directory' and specify the appropriate queue by (you can use the
2
Browse button at the right side to select the *.Q file in the Queue folder).
Make sure the option 'Write (*Job) File in Directory' is not selected.
3
Select the option 'Directory is a Queue'.
4
Click Apply.
5
Print on an Océ 9400 291