To Use Direct Printing; Enable/Disable Direct Printing At Repro Desk Server - Oce Repro Desk User Manual

To use direct printing

To use direct printing, a broadcasted print queue must be opened on Repro
Desk Server. The users of Repro Desk Client can select this queue in the print
menu, to print a job directly on the configured printer. For each job, they can
specify the printer dependent settings themselves. The printer is connected to
Repro Desk Server, and must be specified as default printer for the broadcasted
print queue.

Enable/Disable direct printing at Repro Desk Server

To enable direct printing for users of Repro Desk Client, you must open a
broadcasted print queue on Repro Desk Server. After opening this queue, the
name of the server PC followed by the name of the queue, appears in the print
menu of all Repro Desk Client stations, that are connected to the same TCP/IP
network.
To keep direct printing enabled, the queue must remain opened (you can
minimize the queue window).
When the queue is closed, the option in the print menu of Repro Desk Remote
Client is grayed out, and can no longer be selected.
Make sure the corresponding print manager is up and running. (Select
Note:
'Print Manager' in the 'Program' folder you specified during installation).
Enable direct printing, by opening a broadcasted print queue
Click the 'Queue' button in the tool bar.
1
3685
[214] Queue button
Unattended printing 339