Using The Zoom Settings - Oce Repro Desk User Manual

Defining the original width and length
Open the 'Special original' card in the 'Copy' section.
1
Copies:
Ready to copy
0
Image
Special
original
sheet
Copy
material
......................................................................................................................................
Copy
Original
type
type
size
[307] Defining the original size
Press 'Original width' to select the required setting:
2
Standard. This option must be used to copy a standard-size original.
Non-standard. This option can be used to copy a non-standard original. The
scanned width will be larger than the original width, to prevent information
loss.
Custom. You can define the original width yourself, using the higher/lower
buttons or the numeric buttons.
If you have selected a standard width, you can define the original length by
3
pressing the appropriate button:
Standard. The scanner will use a standard original length.
Automatic. The original length will be measured by the scanner. Or,
If you have selected a non-standard width, the original length is automatically
4
measured by the scanner. You cannot change the original length setting
yourself.
Or,
If you have specified the original width yourself (custom), you can also define
5
the original length by pressing the appropriate button:
Automatic. The original length will be measured by the scanner.
Custom. You can define the original length yourself, using the higher/lower
buttons or the numeric buttons.

Using the zoom settings

You can use the zoom settings on the Océ 9800 operator panel of the scanner
to enlarge the scanned image.
The use of reduction in combination with scan-to-file functionality will
Note:
not result is a reduced image. However, the print copy is reduced.
424 Océ Repro Desk User Manual
Blueprint
Dark
Photo
Normal
Automatic
exposure
................ ................
Machine Program
210 mm
Non-standard
Standard
Filesize
Original
optimization
width
...............
................
Finishing
Copy
400 mm
width
Automatic
Original
length