Add A Stamp To A Drawing - Oce Repro Desk User Manual

Add a stamp to a drawing

After creating and saving, you can add a stamp to a drawing as explained
below.
Adding a stamp to a drawing
Open the job containing the desired drawing
1
Click the drawing you want to add the stamp to with the right mouse button.
2
A drop-down window appears.
Select Add Overlay.
3
The Add overlay to drawing window appears.
Fill in the file name of the stamp you want to add.
4
Click the Open button.
5
In the job window, the stamp name is indented and added to the base drawing.
6
154 Océ Repro Desk Server User Manual