Oce Repro Desk User Manual page 243

Belt Auto: If two belts are installed, you can select this option in order to use
both belts. If one belt is full, the folder will switch automatically to the other
belt.
Select a pre-saved folder configuration
settings, select one of the available configuration files. If required, change one
or more folder settings. If you want to save your new folder settings, click
'Save Config'.
A folding unit must be attached to the Océ TDS600 in order to use this
Folding
field.
If you select the 'Folding' check box, and a folding unit is attached, the
'Method', 'Fold options', 'Create Binding Edge' and 'Custom fold' sections
become available:
Choose 'Standard', 'Ericsson' or 'Afnor'.
Method
Choose 'Punch', 'Reinforce' or 'First fold only'. (A belt or bin is
Fold options
required in the Delivery device section.)
Enter the width and length for the fold, or use the arrows to select
Custom fold
the sizes.
Create Binding Edge
of the folded package. Specify the size of the binding strip.
If you select 'Auto', the machine determines a good fold
Image orientation
package based on image length and roll width.
If you select 'Portrait', the drawing must be in portrait orientation before it is
printed.
Choose 'Standard' to cut the paper output at standard size (not
Cut Method
counting added strips)
Choose 'Synchro' to cut the paper at the size of the image.
Choose 'Custom' to cut the paper at a specified size.
Select the 'Leading' check box to add a strip of white space (blank
Strip
paper) to the leading edge of the media.
Select the 'Trailing' check box to add white space to the trailing edge of the
media.
Print on Océ TDS600
If you want to use previously-saved folder
Select the check box to add a binding strip to one margin
243