Start Océ Repro Desk - Oce Repro Desk User Manual

Start Océ Repro Desk
You can start Océ Repro Desk in several ways just like any other Windows
program. Follow the procedure below. Quitting Océ Repro Desk is explained
later in this chapter (see 'Quit Océ Repro Desk' on page 60).
In general, the server software will be pre-installed, and starts automatically.
However, if problems occur contact your job printer to re-install the software,
or contact Océ service if this software was provided by Océ.
Start Océ Repro Desk
Double click the Océ Repro Desk icon in the Windows screen.
1
[21] Océ Repro Desk Icon
or
Go to 'Start' menu/ 'Programs'/ 'Repro Desk'/ 'Repro Desk'.
2
52 Océ Repro Desk Server User Manual