Other Adjustments; Key Operator Settings - Oce Repro Desk User Manual

Other adjustments

From the Other tab you can adapt the light intensity of the print head, change
the sleepmode time-out, correct the 1:1 projection of the image onto the paper,
print the system settings, make a test print or make a demo print.
Adapt the light intensity of the print head
Make a basic test print by clicking on the Test Print Basic button.
1
Determine which block of the print head related test pattern on the test print
2
has the correct light intensity.
Enter the number next to the correct block in the Enter Value Field and click
3
on the Block Light Intensity button.
The light intensity of the print head is now adapted.
Specify the sleepmode time-out
does not receive any print commands during the predefined time (in seconds)
or does not detect any user interaction. The value of 0 indicates that sleepmode
is disabled.
Specify the sleepmode time-out
Enter the desired value in the Enter Value field and click on the Sleepmode
1
Time-out button.
After confirmation the time-out value is set automatically.
Adapt the image length
Make a basic test print by clicking on the Test Print Basic button.
1
Measure the distance between the A and B markers on the test print.
2
Enter this value (in tenths of millimeters) in the Enter Value field and click on
3
the Length Marker 'A' and 'B' button.
The 1: 1 image length is now automatically adapted.
To print the system settings, basic test print or demo test print, you just
Note:
have to click on the appropriate buttons. The prints will be made automatically.

Key operator settings

From the Key Operator sub menu you can also change your key operator
password, which you need to gain access to the key operator settings.
Print on an Océ 9600
The sleepmode is activated when the printer
277