Oce Repro Desk User Manual page 421

Manually adjusting the exposure setting
Press the 'lighter or darker' button on the scanner operating panel to set the
1
exposure as desired.
Lighter
stamp lighter
6
4
2
0
2
4
6
fold
set input darker
Darker
[304] Lighter/Darker buttons on the Océ 9800
The Océ 9800 allows you to adjust the exposure according to the type of image
on the original. There are four original types available. Select a suitable mode
according to the original (see figure 305).
Copies:
Ready to copy
0
Image
Cut&paste
Blueprint
Special
original
Dark
sheet
Photo
Copy
material
Normal
......................................................................................................................................
Copy
Original
type
size type
[305] Selecting the original type
Adjusting the exposure according the type of image
Open the "Special original' card in the 'Copy' section. As default 'Normal'
1
and 'Automatic exposure' are active. When the original contains characters
and line works this is the most suitable setting.
Press the function button 'Original type' to select 'Photo' when the original
consists of a combination of characters, line art and picture images.
If you select 'Photo', the 'Automatic exposure' will default be
Note:
switched off automatically.
Press the function button 'Original type' to select 'Dark' when the original
has an extremely dark background (That is, low contrast).
Scan 9800/9600
1 2 3 4 5 6 7 8
................
Machine
Automatic
exposure
exposure
sheet feed
auto roll
9 0
................
Program
210 mm
Non-standard
Standard
Filesize
Original
width
optimization
min. 25% max. 400%
roll 1
paper
- +
roll 2
paper
roll 3
paper
100%
roll 4
paper
auto zoom
...............
................
Finishing
Copy
+ 1%
- 1%
421