Queue Administration For Automatic Print Queue - Oce Repro Desk User Manual

Select 'Allow remotes to see this queue'.
4
If required, specify one or more passwords.
5
If required, change the queue timer frequency. The default setting is 30
6
seconds.
If required, specify the queue priority.
7
If required, select 'Enable E-mail notification'.
8
If required, select 'Enable ISO 9000 stamping'
9
Use the
10
Click 'Apply'.
11

Queue administration for automatic print queue

For an automatic print queue, you must disable the 'Allow remotes to see this
Queue' option.
Disable broadcasting (Remotes not allowed to see queue)
in the print menu of other Repro Desk stations connected to the network. Users
of other Repro Desk stations can send a print job to the queue, using 'Send job'
quick menu. In that case the default print settings of the queue will be used. It
is not possible to specify passwords for an automatic queue.
Specifying queue administration for an automatic print queue
Click the 'Queue administration' tab at the top of the 'Configure queue'
1
window.
332 Océ Repro Desk Server User Manual
browse button to select the stamp you want to use.
The queue will not appear