Logo; View Tool Bar; Title Bar; Status Bar - Oce Repro Desk User Manual

More than one window type may be open at a time, but only one mode can be
active. The options available in the menus and toolbars depend on the mode
which is being used.

Logo

The logo indicates the following:
When the logo turns into a moving sheet of paper, the program is processing.
1
When the logo turns into a moving press/stamp, the program is printing.
2
When you click on the logo, the open job will be saved.
Note:

View tool bar

The View toolbar is visible in every mode. But you can only use the buttons
when you are using the View mode.
The View toolbar contains two different tools. Both make changes in the
viewing mode. But some tools do not affect the drawing and other do. The
functionality of the different tools on the View toolbar is explained in
chapter 8, 'View drawings' on page 105.

Title bar

The title bar is at the top of the window Status bar

Status bar

There is a status bar at the bottom of the window, showing extra information
about selected windows or functions:
The software interface 57