Introduction - Oce Repro Desk User Manual

Introduction

You can use Océ Repro Desk to automate print jobs and to print without user
intervention.
Users of Repro Desk Remote Client can print on all printers that are attached
to the Repro Desk Server, without user intervention at the server side. There
are three methods of unattended printing:
Direct printing
settings (such as which roll of paper) for each print job. The print jobs are
printed automatically.
Direct printing does not apply to the Océ 9400 printer.
Note:
Automatic printing
queues with pre-set parameters (similar to print configurations). For example:
a queue with folding, a queue with no folding, etc. When the remote customer
sends a job to be printed, the default printer dependent settings of the selected
print queue will be used for all print jobs. The print jobs are printed
automatically.
Native Printing
Desk LAN Client, and without specifying any print settings. Using a LAN
connection, the drawing can simply be copied into a polling queue on Repro
Desk Server. The drawing will automatically be printed, using the print
settings of the selected polling queue.
That is, the central repro center operator defines a number of queues which
contain all the parameters. There is no need to open Repro Desk Remote
Client, the user simply drops a file into the queue.
308 Océ Repro Desk Server User Manual
The users of Repro Desk Remote Client can define all print
The central repro center operator defines a number of
Native drawings can be printed without the need for Repro