The following window will appear:
4
[157] Finishing Properties window
Specify the required print settings in the Finishing Properties window
5
(see sections below).
Click OK.
6
The job will be sent to Océ 9600 Print Manager to be printed.
The 9600 printer performs error recovery from within the software.
Note:
Error recovery may be performed after a paper jam, paper out situation, folder
jam, or machine error. If printing is completed (that is, the Print dialog box
has disappeared) but a paper jam occurs in the printer, the Print dialog box
may appear again to perform error recovery. Simply allow the software to
reprint the drawing that was jammed in the printer.
Print on an Océ 9600
279
Need help?
Do you have a question about the Repro Desk and is the answer not in the manual?