Real-Time Viewing; How It Works - Oce Repro Desk User Manual

Real-time viewing

If you wish, scanned images can also be previewed one by one in the 'Scan
status' section of the Print Manager at the moment they enter the Repro Desk
job. Using the Viewer does not slow down the scanning, so it is a matter of
personal preference whether you use it or not.
[265] Scan preview on the Print Manager

How it works

The Power Logic Controller of the Océ TDS800 controls the actual scanning.
Scans are sent to the Repro Desk Server PC by selecting the Repro Desk PC as
the target destination on the Océ TDS800 scanner panel.
Besides initiating the transfer of the scan to the Repro Desk Server PC at the
Océ TDS800, you must also instruct Repro Desk to receive the scans into a
(scan) job. Note that by separating the scan generation process at the Océ
TDS800 scanner and the receiving of scans into Repro Desk Server, two
operators may work independently to optimize the workflow of plot and scan
jobs.
Scan TDS 389