Oce Repro Desk User Manual page 392

Click 'OK'.
3
The scan job is saved. The 'Scan' button in the toolbar changes to a 'Stop Scan'
button.
Scan the original on the Océ TDS800 scanner.
4
The scanned original appears as a file in the job window.
If 'Rename Scan Files' is checked, Repro Desk renames the incoming
Note:
scans according to the template. Otherwise, the naming convention on the PLC
is used.
Scan into an existing, not saved job
Make sure the existing, not saved job is active.
1
Click the 'Scan' button in the toolbar.
2
The following dialog box appears.
[271] Scan into a not saved job dialog box
Click 'Yes'.
3
The active job is renamed.
The renamed job window contains the files of the existing, not saved job (if
any).
In front of the renamed job window, the following dialog box appears.
[272] Scan into job dialog box
If required, define the job name, destination and file template.
4
Click 'OK'.
5
The scan job is saved. The 'Scan' button in the toolbar changes to a 'Stop Scan'
button.
Scan the original on the Océ TDS800 scanner.
6
The scanned original appears as a file in the job window.
392 Océ Repro Desk Server User Manual