Finishing Tab - Oce Repro Desk User Manual

Select both check boxes to have multiple sets printed with the first sheet on top.

Finishing tab

The finishing tab contains settings for delivery, folding, orientation cut method
and add a leading edge.
Set the Finishing options
Select 'Print Océ TDS600' in the 'Print' quick menu.
1
Click the 'Finishing' tab at the top of the window.
2
The following window will appear:
3
[133] Finishing Properties Window: Finishing tab
Use job settings
Delivery device
Printer default: Use the delivery device as configured on the Power Logic
Controller.
If the Océ TDS600 is equipped with a folder, you can select one of the
following options for the folded output:
Stacker: The folded output will be delivered in the standard delivery tray of
the folder.
Belt 1 or Belt 2: If installed, you can select one of the delivery belts to collect
the folded output.
242 Océ Repro Desk Server User Manual
Use the folder settings as defined in the actual job.
From the list, choose where the output will be delivered.