Job Default Settings - Oce Repro Desk User Manual

Job default settings

In the Job Default Settings tab you can check and change the following
settings:
[15] Specify job default settings
Copies
the job.
The default zoom ratio when printing a job. Choose between 25% and
Zoom
400%. You can also select 'Fit Page'.
Paper size
it is added to a Job.
Media
Transparent or Film (polyester).
Pen set
a drawing is added to a Job.
Make paper size same as drawing size
appropriate size roll whenever possible.
Alignment
44 Océ Repro Desk Server User Manual
RDSS6000.TIF
The default number of copies that will be applied for each file added to
The paper size that will be applied by default to a drawing each time
The default media to be used. Choose between Bond (paper),
The name and path of the default pen set that must be applied each time
The alignment to be used by default.
This means that the printer will print to the