Oce Repro Desk User Manual page 404

Only print files
Print files and scan files.
When you open a saved job that does not contain scan files, you can define the
file template for the new scan job.
When you open a saved job that contains scan files, you can not change the file
template for the new scan job. This prevents you from overwriting the existing
scan files in the job.
The procedure is basically the same in both cases. Depending on whether or
not the saved job already contains scan files, in step 3 another dialog box
appears.
Do the following to scan files into a saved job.
Open a saved job (see 'To open a previously saved job' on page 71).
1
Click the 'Scan' button in the toolbar.
2
The following dialog box appears.
[285] Scan into a saved job dialog box
Click 'Yes'.
3
If the saved job only contains print files, the following dialog box appears.
[286] Scan into a saved job that only contains print files dialog box
If the saved job contains print files and scan files, the following dialog box
appears.
404 Océ Repro Desk User Manual