Oce Repro Desk User Manual page 237

or more folder settings. If you want to save your new folder settings, click
'Save Config'.
A folding unit must be attached to the Océ TDS800 in order to use this
Folding
field.
If you select the 'Folding' check box, and a folding unit is attached, the
'Method', 'Fold options', 'Create Binding Edge' and 'Custom fold' sections
become available:
Choose 'Standard', 'Ericsson' or 'Afnor'.
Method
Choose 'Punch', 'Reinforce' or 'First fold only'. (A belt or bin is
Fold options
required in the Delivery device section.)
Enter the width and length for the fold.
Custom fold
Select the check box to add a binding strip to one margin
Create Binding Edge
of the folded package. Specify the size of the binding strip.
If you select 'Auto', the machine determines a good fold
Image orientation
package based on image length and roll width.
If you select 'Portrait', the drawing must be in portrait orientation before it is
printed.
Choose 'Standard' to cut the paper output at standard size (not
Cut Method
counting added strips)
Choose 'Synchro' to cut the paper at the size of the image.
Choose 'Custom' to cut the paper at a specified size.
Select the 'Leading' check box to add a strip of white space (blank
Strip
paper) to the leading edge of the media.
Select the 'Trailing' check box to add white space to the trailing edge of the
media.
Enter a number in the field to specify how much white space.
The strip is added to the cut length, so the resulting media size is not
Note:
standard.
Print on Océ TDS800 237