Oce Repro Desk User Manual page 251

If you select 'Portrait', the drawing must be in portrait orientation before it is
printed.
Choose 'Standard' to cut the paper output at standard size (not
Cut Method
counting added strips)
Choose 'Synchro' to cut the paper at the size of the image.
Choose 'Custom' to cut the paper at a specified size.
Select the 'Leading' check box to add a strip of white space (blank
Strip
paper) to the leading edge of the media.
Select the 'Trailing' check box to add white space to the trailing edge of the
media.
Enter a number in the field to specify how much white space.
The strip is added to the cut length, so the resulting media size is not
Note:
standard.
Print on Océ TDS400 251