Rolls And Sets (Océ 9700/9800) - Oce Repro Desk User Manual

Rolls and Sets (Océ 9700/9800)
You can select the paper roll or Bypass (manual sheet feed), and specify the
number of sets you want to print.
Specifying rolls and sets
If not already selected, click the 'Rolls and Sets' tab at the top of the 'Finishing
1
Properties' window.
The following window will appear:
2
3811-144
[144] Finishing Properties window: Rolls and Sets
Select one of the rolls, bypass or auto roll. if you select auto roll, the
3
Océ 9700/9800 will select the roll that ensures a best fit for the printed
drawing. First Repro Desk searches for a roll of the specified media type. If
such a roll is found, Repro Desk will search for the exact size. If the exact size
is not found, a larger size will be selected.
Specify the number of copies of the whole job (sets) you want to print, in one
4
of the following ways:
You can fill in a number, or
Select 'Use copies field instead'.
If you select this option, the number of copies as defined in the job window
will be used.
258 Océ Repro Desk User Manual