Gathering Information - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

2. Copy exactly the user name and password used when creating the TEMS client.
3. Click OK.

Gathering information

Before you use the encryption setup wizard for the first time, you should also have a detailed
configuration plan in place and available for reference. The encryption setup wizard assumes the
following:
•
•
•
•
•
•
•
•
DCFM Enterprise User Manual
53-1001775-01
You may create different credentials, but if you do, you also need to change the TEMS client
credentials to match the new credentials.
You have a plan in place to organize encryption devices into encryption groups.
If you want redundancy and high availability in your implementation you have a plan to create
high availability (HA) clusters of two encryption switches or blades to provide failover support.
All switches in the planned encryption group are interconnected on an I/O synch LAN.
The management ports on all encryption switches and 384-port Backbone Chassis CPs that
have encryption blades installed have a LAN connection to the SAN management program, and
are available for discovery.
A supported key management appliance is connected on the same LAN as the encryption
switches, 384-port Backbone Chassis CPs, and the SAN Management program.
An external host is available on the LAN to facilitate certificate exchange.
Switch KAC certificates have been signed by a Certificate Authority (CA), and stored in a known
location.
Key management system (key vault) certificates have been obtained and stored in a known
location.
Gathering information
20
523