Downloading The Local Ca Certificate From Skm; Creating And Installing The Skm Server Certificate - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

7.
8. From the list of Available CAs in the right panel, select the CA you just created.
Repeat these steps any time another local CA is needed.

Downloading the local CA certificate from SKM

The local CA certificate you created using the procedure for
Authority (CA) on SKM"
be imported onto the Brocade encryption group leader nodes.
1. From the Security tab, select Local CAs under Certificates and CAs.
2. Select the CA certificate you created.
3. Click Download, and save the certificate file on your local system.
4. Rename the downloaded file, changing the .cert extension to a .pem extension.

Creating and installing the SKM server certificate

To create the SKM server certificate, perform the following steps:
1. Click the Security tab.
2. Under Certificates and CAs, select Certificates.
3. Enter the required information under Create Certificate Request.
4. Click Create Certificate Request.
5. Select the newly created server certificate from the Certificate List.
6. Select Properties.
7.
8. Under Certificates & CAs, select Local CAs.
9. From the CA Name column, select the name of the local CA you just created in
10. Click Sign Request.
DCFM Enterprise User Manual
53-1001775-01
In the Trusted Certificate Authority List, click Edit.
on page 514 must be saved to your local system. Later, this certificate must
-
Enter a Certificate Name and Common Name. The same name may be used for both.
-
Enter your organizational information.
-
Enter the E-mail Address where you want messages to the Security Officer to go.
-
Enter the Key Size. HP recommends using the default value: 1024.
Successful completion is indicated when the new entry for the server certificate appears on
the Certificate List with a Certificate Status of Request Pending.
The pending request displays under Certificate Request Information.
Copy the certificate data from -----BEGIN CERTIFICATE REQUEST----- to -----END CERTIFICATE
REQUEST--––– lines. Be careful to exclude extra carriage returns or spaces after the data.
The Certificate and CA Configuration page is displayed.
local Certificate Authority (CA) on SKM"
Downloading the local CA certificate from SKM
"Setting up the local Certificate
on page 514.
20
"Setting up the
515

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm enterprise

Table of Contents